Load data for .35 Rem. + .358 | 200gr | Hornady InterLock RN

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.358 \| 200gr \| Hornady InterLock RN
Manufacturer SKU:	3515
Bullet Weight:	200gr \| 13.0g
Bullet Diameter:	0.358" \| 9.09mm
Bullet Length:	0.888" \| 22.6mm
Caliber:	.35 Rem. load data
Case Length (l3):	1.920" \| 48.8mm
Cartridge Length (C.O.L.):	2.487" \| 63.2mm
Seated Depth:	0.321" \| 8.2mm
Shank Seated Depth:	0.321" \| 8.2mm
Case Capacity:	51.0 Grains of Water \| 3.31 cm³
Primer Size:	Large Rifle (LR)
Max. allowed Pressure:	39885 psi \| 2750 bar
LID:	LID_B2796_C483
Last updated:	2025-01-01

Load data for 40 loads in caliber .35 Rem. with .358 | 200gr | Hornady InterLock RN bullet and 20 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
Muzzle velocity vs. barrel length
Every 1 inch additional barrel length increases muzzle velocity by approx. 20.1 fps
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	86%	35433	89%	**21	100%
[ADI AR 2219]*	<<locked>>	89%	34998	88%	**24	93%
Accurate 2015	<<locked>>	96%	35621	89%	**38	97%
[Accurate 2495]*	<<locked>>	96%	26455	66%	**46	93%
Alliant AR-Comp	<<locked>>	97%	32068	80%	**15	97%
Alliant Reloder-10x	<<locked>>	93%	35447	89%	**47	97%
Alliant Reloder-7	<<locked>>	84%	35288	88%	**78	98%
[Baschieri & Pellagri 106]*	<<locked>>	89%	35737	90%	**56	94%
[Hodgdon H322]*	<<locked>>	95%	35491	89%	**34	93%
[Hodgdon H335]*	<<locked>>	90%	35143	88%	**31	92%
[Hodgdon H4198]*	<<locked>>	85%	35520	89%	**29	93%
IMR 4198	<<locked>>	90%	35810	90%	**92	98%
Norma 200	<<locked>>	88%	35041	88%	**28	98%
[Rottweil R 901]*	<<locked>>	97%	34418	86%	**98	92%
[SNPE Vectan SP 10]*	<<locked>>	90%	35795	90%	**41	92%
[SNPE Vectan Tubal 3000]*	<<locked>>	97%	34505	87%	**42	92%
[Somchem S335]*	<<locked>>	96%	32590	82%	**33	92%
Vihtavuori N120	<<locked>>	89%	35737	90%	**92	100%
Vihtavuori N130	<<locked>>	94%	35781	90%	**95	97%
[Vihtavuori N133]*	<<locked>>	96%	31415	79%	**03	94%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	81%	30124	76%	**16	99%
[ADI AR 2219]*	<<locked>>	83%	28950	73%	**83	90%
[Accurate 2015]*	<<locked>>	82%	22452	56%	**26	90%
[Accurate 2495]*	<<locked>>	91%	22669	57%	**34	90%
[Alliant AR-Comp]*	<<locked>>	83%	21451	54%	**09	90%
[Alliant Reloder-10x]*	<<locked>>	81%	24903	62%	**05	93%
Alliant Reloder-7	<<locked>>	81%	32140	81%	**13	97%
[Baschieri & Pellagri 106]*	<<locked>>	81%	27963	70%	**88	91%
[Hodgdon H322]*	<<locked>>	89%	29211	73%	**93	90%
[Hodgdon H335]*	<<locked>>	87%	32082	80%	**62	90%
[Hodgdon H4198]*	<<locked>>	81%	31415	79%	**44	91%
IMR 4198	<<locked>>	81%	28065	70%	**14	95%
Norma 200	<<locked>>	81%	27992	70%	**73	96%
[Rottweil R 901]*	<<locked>>	93%	31227	78%	**29	90%
[SNPE Vectan SP 10]*	<<locked>>	86%	31749	80%	**59	90%
[SNPE Vectan Tubal 3000]*	<<locked>>	93%	31183	78%	**77	90%
[Somchem S335]*	<<locked>>	91%	28065	70%	**34	90%
Vihtavuori N120	<<locked>>	81%	28355	71%	**44	99%
[Vihtavuori N130]*	<<locked>>	81%	24163	61%	**26	92%
[Vihtavuori N133]*	<<locked>>	88%	24714	62%	**36	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data